KERN & SOHN ILJ 25K-4CM - Manual (Page 72)

72 ILJ-C/ILS-C-BA-e-1320
13.8 HOLD function
This function is used to determine the maximum value during a weighing
process.
You may enter a threshold value from which measurement is to take place.
Set threshold value:
We recommend entering the threshold value in grams.
The display for entering a threshold
value will appear with the left digit
flashing. Use the arrow keys to enter
the threshold value in grams and
confirm by pressing PRINT.
As soon as this value is exceeded, the weighing scale will start measuring and the
maximum value will be displayed.
Carry out measuring:
The Hold function is now enabled.
The net weight will be displayed on the
info line.
The weighing scale is ready for
measuring.
(example)
The maximum weight above the
threshold value will be displayed on
the main display. In addition the max
symbol will appear.
To carry out additional measurements,
remove the sample from the weighing
plate and press UNIT.
Return to weighing mode
Press MODE and F1 WEIGHING will be displayed. Confirm by pressing PRINT and
the weighing scale will change to weighing mode.