KERN & SOHN ILJ 25K-4CM - Manual (Page 35)

ILJ-C/ILS-C-BA-e-1320 35
11 Weighing
11.1 Switch on-off balance
The weighing scale will carry out a self-test after having been connected to the
power supply and will then automatically go into weighing mode.
To turn off press the ON/OFF-key; time will be displayed. The balance is now in
stand-by mode No warming-up up time is required and it will be ready for
operation immediately after switching on (Press ON/OFF-key).
To switch-off the balance completely, separate balance from power supply.
11.2 Weighing
For warm-up time required for stabilisation (see chap. 1)

Check zero display [ ] and set to zero with the help of the TARE key, as
required.

Place goods to be weighed on balance.

Wait until the stability display appears ( ).

Read weighing result
When an optional printer is connected, the weighing value can be edited.