KERN & SOHN ILJ 25K-4CM - Manual (Page 51)

ILJ-C/ILS-C-BA-e-1320 51
13 Additional operating modes
Menu item P2 OPERATING MODULES
The weighing scale offers the following operating modes:
Weighing, see chap. 11
Parts counting
Checkweighing
Dosing
Deviation (determination of percentage)
Density determination of solids
Determining density of liquids
Animal weighing
Statistics function
Totalization
HOLD function
Chapter 11.6 first describes how to enable the desired operating modes.
13.1 Parts counting
Before the balance can count parts, it must know the average part weight (i.e.
reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts (the so-
called reference quantity). Counting is then carried out on the basis of the calculated
average piece weight.
As a rule:
The higher the reference quantity the higher the counting exactness.