KERN & SOHN CXP Version 1.7 - Manual (Page 45)

�
STl XX X -
Number of output values
X: 0 – F (0-15)
� Confirm setting X by pressing the key, then enter settings according
to table 2. See also delineation 1 (example for input)
� STl XX 40 XX XXXXXX Type of output values
�
K0SET
PAlAL Not documented
R232� RS 232 interface, to be used at
all times
Confirm setting by pressing the key, then carry out further settings
BAUD
9600
Baud rate
4800�
2400�
1200�
Confirm setting by pressing the key, then carry out further settings
PARKH� NONE� Parity
ODD�
EVEN�
Confirm setting by pressing the key, then carry out further settings
DAHA�
8� Data bit
7�
Confirm setting by pressing the key, then carry out further settings
STQP�
1� Stop bit
2�
Confirm setting by pressing the key, then carry out further settings
FLOef� rtCtS�
NONE� Always use this setting
� SETC
0�
Output after pressing
1�
Continuous serial output
2� Output after stabilisation (weight >0)
3� Output of all weighing values after
stabilisation
CXB/CXP-BA-e-1417 45