KERN & SOHN WTB 30K-2NM - Manual (Page 32)

9.3 Set auto-OFF function
 Switch on the scales by
and during the balance’s self-
test, press until "F1 CAL" is displayed.





 Press repeatedly until „F5 oFF“ appears
 Select function using
 Use to change between the individual parameters
 Select the desired parameter using
“F5 oFF“ appears, now the function is enabled
 Press repeatedly until “bACK“ appears
 Press
The balance carries out a restart and changes to weighing
mode
WTB-N_WTB-NM-BA-e-1421 32