KERN & SOHN WTB 30K-2NM - Manual (Page 25)

8 Operation
8.1 Weighing
 Start balance by pressing
.
The balance will carry out a self-test
When the weight display shows "0.0" and the triangle symbol
above the stability display appears, the scale is ready
for weighing.
 However, you can reset the weighing scale to zero by pressing
the key.
 Switch off balance using .
The "0.0" display disappears and the scales are switched off.
8.2 Taring
The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the weighed material is displayed in subsequent weighings.
(example)

 Put on weighing receptacles and press .
The zero display appears, and above the reset symbol
the stability symbol and the net weight symbol the
triangle appears.
The weight of the container is now internally saved.
(example)
 Place goods to be weighed in the weighing container.
The net weight of the goods to be weighed is displayed.
The weight of the weighing container will be displayed as a
minus number (=gross weight) after removing the weighing
container.
25 WTB-N_WTB-NM-BA-e-1421