1 adjustment non verifiable models, Adjustment non verifiable models – KERN & SOHN WTB 30K-2NM User Manual
Page 21

7.1.1
Adjustment non verifiable models
Display
Operation
Start balance by pressing
While the balance carries out a self test (00…- 99…), press
and keep pressed until „F1 CAL“ appears on the
display.
Press
;
in the display appears „UnLod“. Wait for the triangle above
the stability symbol, then press
, the value of the last-
used adjustment weight is displayed. Exp: „6 kg“. If
necessary, change value by
.
(example)
Place the adjustment weight
Wait for the triangle above the stability symbol
Press
While the balance carries out a self-test, take away the
adjustment weight
The balance changes over to zero display.
Now the process of adjustment is completed.
If the display shows an error message or an incorrect value, repeat adjustment
process. If the error message remains, please contact your dealer.
21
WTB-N_WTB-NM-BA-e-1421