1 calibration of temperature value – KERN & SOHN DLB 160-3A User Manual
Page 21
DLB_A-BA-e-1511
21
8.2.1 Calibration of temperature value
During temperature calibration only a check is carried out, i.e. no values are changed.
Invoke service function „Tmp test“, see chap. 8.2
Confirm by pressing the PRINT button. The current setting will be displayed. Use
the navigation buttons
to select the temperature during the check, available
35- 160°C, e.g. 120°C.
Confirm using the PRINT button, the appliance heats up to the set temperature.
After approx. 15 minutes compare the test temperature with the displayed
temperature of the DLB-A01N. If the two values do not match, we recommend a
temperature adjustment, see chap. 8.2.2
Use the ON/OFF button to finish the calibration.
Use the ON/OFF button to return into weighing mode.
- TEE 150-1 (2 pages)
- TCB 200-1 (2 pages)
- CM 60-2N (14 pages)
- TAB 20-3 (14 pages)
- TEB 200-1 (11 pages)
- EMB 100-3 (18 pages)
- EMB 500-1GN (16 pages)
- EMB 500-1BE (48 pages)
- DBS 60-3 (91 pages)
- DLT 100-3N (77 pages)
- MLB 50-3C (68 pages)
- MLS 50-3C (83 pages)
- ABS 80-4N (96 pages)
- ABT 120-4M (72 pages)
- AES 100-4C (119 pages)
- AES 100-4N (85 pages)
- AET 500-4 (189 pages)
- ALS 160-4A (78 pages)
- ALT 160-4B (94 pages)
- ECB 10K5 (16 pages)
- ECE 10K5 (12 pages)
- FCB 3K0.1 (36 pages)
- FCE 3K1N (15 pages)
- FFN 1K-4N (32 pages)
- FKB 6K0.02 (42 pages)
- FKB 8K0.1A (39 pages)
- FKT 6K0.1 (53 pages)
- FKT 60K1L (7 pages)
- FOB 1.5K0.5 (21 pages)
- GAB 6K0.05N (41 pages)
- GAB 6K-5P (39 pages)
- WTB 1K-4N (35 pages)
- FOB 500-1S (17 pages)
- FOB 0.5K-4NS (27 pages)
- IXS 6K-3M (109 pages)
- IXS 6K-3M Platform (9 pages)
- SFB 50K-3XL (53 pages)
- SFB 50K-3XL Addendum (6 pages)
- KFE-TM (58 pages)
- FXN 3K-3 (22 pages)
- IEX 6K-3MEU (13 pages)
- IEX 6K-3MEU Safety (11 pages)
- OEX (15 pages)
- OEX Safety (12 pages)