Keri Systems Doors.NET Quick Start - Manual (Page 6)

Part no. 01565-001 6 Version 1.0
•
Upgrade Firmware (if appropriate)
NOTE: When upgrading firmware, the Administrative Client must run on the computer that is
running the NXT Gateway service.
o In the Hardware Setup tab, select the All tab and then select a controller on the tree.
o Click on the Firmware Upgrade button, which will be present in the Selected Items
Toolbar ribbon.
o Select the controller or controllers that need to be updated in the Available Controllers
list and then select a firmware file and click apply.
o A progress bar will appear on the right side of the selected controller tracking the
progress of the firmware upgrade.
o The Firmware Upgrade is complete once the progress bar for all selected controllers
reaches 100%.
•
Configure Controller Properties