2 connecting to the pxl–100 @ ob–7, j2, Rpb–200 : rf receiver, Quick start guide rpb–200 – Keri Systems RPB-200 User Manual
Page 4
RPB–200: RF Receiver
1530 Old Oakland Road, Suite 100
01825-200 Rev. B
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 4 of 8
Quick Start Guide
RPB–200
2.3.2
Connecting to the PXL–100 @ OB–7, J2
Figure 5: PXL–100/OB–7 Connections
NOTE: Please contact customer support at Keri Systems for information regarding connecting an RPB-200 to a Design
4 PXL-100. A Design 4 PXL-100 can be identified by the location of its power connection made at the middle of the left
edge of the printed circuit board.
Pin #
OB–7 PCB
Marking
Function
Wire Color
1
LED
Red LED
Brown
2
BEEPER
not used
–
3
–
–
–
4
–
–
–
4
–
–
–
5
M IP B
Data 1
White
6
M IP A
Data 0
Green