Kenton Pro-4 - Manual (Page 5)

5
FRONT PANEL
Access to channels A to D`s tuning trimmers are gained from the front panel.
Each channel, A to D, has LED indicators to indicate when that channel`s Gate is on.
There are two more LED status indicators;
One is marked DATA. This indicates whether the PRO-4 is receiving MIDI data.
The other is marked SYNC. This indicates whether the PRO-4 is receiving MIDI clock messages.
Four buttons; PARAMETER, VALUE, LOAD and STORE, and also a Data Entry Dial.
These are for editing the PRO-4 & are explained later in the manual.
2x20 backlit LCD, and power switch.
BACK PANEL
From left to right, there is the;
IEC power socket (power lead supplied).
MIDI In, Out, and Thru DIN type sockets.
Sync24 DIN socket.
Clock pulse minijack output.
The Wasp/DCB and KADI ports, D-type sockets.
The eight auxiliary minijack outputs.
And the four analogue channels` Trig, Gate, CV & Hz/V (if fitted) minijack outputs.