Casio IT-3000 - Manual (Page 60)

E-58
Using the Bridge Satellite Cradle (HA-B61IO)
Configuring DIP Switch Settings
Removing the bottom cover of the Bridge Satellite Cradle exposes the DIP switches.
You can change the ON/OFF settings of the DIP switches to set the configuration. Only
set the DIP switches after first switching OFF the power.
1 2 3 4 5 6 7 8
Not used (Always off)
Not used (Always off)
Host Computer Interface
Setting
RS-232C
USB 6
OFF
ON
Setting
Intermediate Unit
Daisy Chain Disabled/Termination 5
OFF
ON
Setting
Host Computer
Daisy Chain 3
OFF
ON
4
OFF
OFF
Daisy Chain
Connection Type
Setting
115,200bps
*Initial factory setting
1
ON
2
OFF
Bridge Satellite Cradle Data Rate
*
*
*
*
Important!
Note that other DIP settings are used for testing and inspection purposes. Because
of this, you should never use any DIP settings other than those described above.
IT-3000_E_P54_77.p65 07.10.3, 5:39 PM 58