Casio IT-3000 - Manual (Page 27)

E-25
15 Battery Pack
Cover Lock Switch
16 Battery Pack
Cover
17 PC Card Slot
18 Hand Strap Hook
19 14-pin Serial
Interface
Connector
20 Power Terminals
21 Neck Strap Hooks
22 Magnetic Card Reader
(IT-3000M54E2/
M55E/M55U)
23 Reset Switch
24 Screen Protect
Cover Mounting
25 C-MOS Imager
(IT-3000M55E/
M55U/M56E/
M56U only)
Turn this switch when opening and closing the battery pack
cover.
Houses the battery pack inside.
For connection of a separately sold PC card. Remove the cover
to install a PC card.
Hook the hand strap here.
Provided for future use.
Terminals for supplying power from the Bridge Satellite Cradle
and Cradle-type Battery Charger.
Hook the neck strap here.
Magnetic cards are read by passing through this magnetic card
reader.
Remove the cover to use.
Press to reset the Handheld Printer Terminal. Be careful not to
press by mistake.
Remove the screws when attaching the Screen Protect Cover.
Reads 1D bar code symbologies and stacked 2D code
symbologies.
IT-3000_E_P16_32.p65 07.10.3, 5:37 PM 25