Replace the port adapter or service adapter – Cisco 7301 User Manual
Page 30
30
Insert the CompactFlash Disk into the CompactFlash Disk slot with the label with the vendor name and memory size facing up.
The CompactFlash Disk protrudes when completely inserted.
Note
Only the CompactFlash Disk is supported in a Cisco 7301 router. Other types of Flash Disks are not supported.
•
The larger the CompactFlash Disk size, the longer the system boot time.
•
The CompactFlash Disk supports online insertion and removal (OIR).
•
Use the CompactFlash Disk to store your configuration files and Cisco IOS software image. The Cisco 7301 router has no
onboard Flash memory.
For more information on CompactFlash Disk, see Appendix B, “Using the CompactFlash Disk,” in the Cisco 7301 Installation
and Configuration Guide.
Replace the Port Adapter or Service Adapter
The port adapter or service adapter ships installed. These instructions are provided for future use. Cabling information is
included with the specific port adapter documentation.
Figure 20
Removing and Installing the Port Adapter
Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the
backplane with your hand or any metal tool, or you could shock yourself. Statement 94.
Note
Before removing any port adapter, gracefully shut down the interface so that there is no traffic running through the port
adapter when it is removed. Removing a port adapter while traffic is flowing through the ports can cause system
disruption.
Step 1
Attach an ESD wrist strap between you and an unpainted chassis surface. For wrist straps with a banana jack, insert
the banana jack in its grounding hole located on the front of the chassis, near the STATUS LED and power switch.
1
Port adapter latch
3
Port adapter slot guide
2
Port adapter partially removed
4
Ground for ESD wrist strap banana jack
80268
ALARM
RJ45 EN
LINK
TX
RX
GBIC
GIGABIT ETHERN
ET 0/2
RJ45 EN
LINK
TX
RX
GBIC
GIGABIT ETHERN
ET 0/0
RJ45 EN
LINK
TX
RX
GBIC
GIGABIT ETHERN
ET 0/1
CISCO 7301
SLOT 1
CONSOLE
AUX
COMPACT
FLASH
STATUS
100-240V, 2A
, 50/60 Hz
24V=9A, 48 - 6
0V=5A
1
ENABLEDRX
C
EL
LS
RX
C
AR
RIE
R
RX
A
LA
RM
ATM
2
4
3
B
A