beautypg.com

Installing your television set, The keys on the tv set, Installing your television set o – Philips Stereo-TV User Manual

Page 4: Positioning the television set © remote control, Connections, Switching on

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Installing your television set

O

Positioning the television set © Remote control

./S'

Place your TV on a solid, stable surface,

leaving a space of at least 5 cm around the

appliance. To avoid accidents, do not put

anything on the set such as a cloth or cover,

a container full of liquid (vase) or a heat

source (lamp). The set must not be exposed

to v/ater.

© Connections

• Insert the aerial plug into the nr socket at

the rear of the set.

• For the versions equipped with a radio:

insert the radio aerial socket into the FM

ANT socket using the adapter supplied.

if you are using an indoor aeriai, reception may

be diffcuit in certain conditions. You can improve

reception by rotating the aeriai. if the reception

remains poor, you wiii need to use an externai

aeriai.

• Insert the mains plug into a wall socket (220-

240 V / 50 Hz).

Insert the two R6-type batteries (supplied)

making sure that they are the right way round.

Check that the mode selector is set to TV.

The batteries suppiied with this appiiance do not

contain mercury or nickei cadmium, if you have

access to a recyciing faciiity piease do not discard

your used batteries (if in doubt, consuit your

deaier). When the batteries are repiaced, use the

some type.

O

Switching on

The keys on the TV set

The television set has 5 keys which are located

on the front or the top of the set depending

on the model. The on/off key switches the TV

set on/off.

To switch on the set, press the on/off key.

A red indicator comes on and the screen

lights up. Go straight to the chapter Quick

installation on page 5.

If the television remains in standby mode,

press P © on the remote control.

The indicator wiii fash when you use the remote

controi.

The VOLUME - + keys are used to adjust sound

levels. The PROGRAM A V keys are used to

select the required programmes. To access the

menus, simultaneously hold down the VOLUME

- + keys. The PROGRAM A V keys may

then be used to select an adjustment and the

VOLUME - + keys to make that adjustment.

To exit from the menus, hold down the 2

VOLUME - + keys.

Note: when the Child Lock function is activated,

these keys are unavaiiabie (refer to

Features

menu on page 8).