Panasonic SPX900 User Manual
Page 49
49
4
P2 card remaining
free space
___min
END
WP
LOOP
INFO P2
_/_
The indication “
___min” stays illuminated under normal conditions or blinks when
the remaining level is near zero.
When the card space is used up, “END” comes on.
The P2 card is write-protected.
The camera-recorder is in LOOP REC mode. When loop recording cannot be
performed, for example because the P2 card has no free space, the indication
blinks.
P2 card being recognised.
Total free space/capacities of the P2 cards (when MODE CHECK is being
performed).
the P2 card slot that contains the target card is indicated, together with the
remaining space.
For more information, see [P2 Card Remaining Free Space/capacity Indication] on
the next page.
P2 card remaining
free space (when
MODE CHECK is
being performed)
___min
The number of the P2 card slot that contains the target card and the remaining free
space (when MODE CHECK is being performed) are indicated. In LOOP REC
mode, the minimum guaranteed recording time is indicated. This indication also
appears when the target P2 card has been switched with a user button.
The minimum guaranteed recording time refers to the sum, at the time loop
recording is stopped, of the remaining free space of available P2 cards, except for
the card with the largest remaining free space.
Example: If three P2 cards are available, with remaining space of eight minutes,
five minutes and two minutes respectively, then the minimum
guaranteed recording time is seven minutes.
D.ZOOM
DZ
Camera-recorder in digital zoom mode. Note that the indication blinks while the
camera-recorder is in FOCUS mode.
Super iris ON/super
black ON
S
B
SB
Super iris ON.
Super black ON.
Super iris and super black both ON.
Color temperature
_._K
Color temperature assigned to A, B, and PRE of the WHITE BAL switch (this is a
value stored at AWB performance or a value set through the menu option). The
indication is not provided in ATW mode.
Shutter speed/mode
1/__._
1/60 - 1/2000
SUPER V
Shutter speed set to SYNCHRO SCAN.
Shutter speed fixed.
Shutter speed set to SUPER V (high vertical resolution mode).
Information Item
Indication
Status