Panasonic SPX900 - Manual (Page 22)

22
Chapter 3 Recording and Playback
3-1 P2 Cards
Inserting P2 Cards
When using the camera-recorder for the first time, be sure to set
the time data beforehand. On how the time data is set, see [4-5
Setting Time Data].
1
Turn on the POWER switch.
2
While pressing down the slide lock button, slide the slide-
out door to the left.
The door opens.
3
Insert a P2 card into the P2 card slot until the EJECT button
pops up.
4
Tilt up the popped-up EJECT button, to lock-in the P2 card.
5
Insert a P2 card into the AJ-SPX900E. The P2 CARD
ACCESS LED for the appropriate slot indicates the status
of the P2 card.
For how the P2 card status is indicated, see [P2 CARD
STATUS LED and status of P2 cards] on the next page.
6
Close the slide-out door.
Do not leave the slide-out door open when moving the AJ-
SPX900E.
POWER: ON
Slide-out door
Slide lock
button
EJECT button
The card must be
inserted with the
logo right way up.
P2 card
LED