Canon HF M31 - Manual (Page 163)

Additional Information
Š 163
Trouble?
Troubleshooting
If you have a problem with your camcorder, refer to this section. Some-
times what you think is a malfunction of the camcorder may have the
simplest of solutions - please read the “CHECK THIS FIRST” box
before going on to the more detailed problems and solutions. Consult
your dealer or a Canon Service Center if the problem persists.
CHECK THIS FIRST
Power source
The camcorder will not turn on or it turns off by itself.
- The battery pack is exhausted. Replace or charge the battery pack.
- Remove the battery pack and reattach it correctly.
- When the recording program is set to [Underwater] or [Surface], the camcorder may turn off
automatically if it becomes too hot. Turn off the camcorder and let it cool down.
Cannot charge the battery pack.
- Make sure the camcorder is off so charging can start.
- The temperature of the battery pack is outside the charging range. If the battery pack’s tem-
perature is below 0 °C, warm it before charging it; if it is above 40 °C, let the battery pack
cool down before charging it.
- Charge the battery pack in temperatures between 0 °C and 40 °C.
- The battery pack is faulty. Replace the battery pack.
Power supply
• Is the battery charged? Is the compact power adapter correctly con-
nected to the camcorder? ( 0 19)
Recording
• Did you turn the camcorder on and correctly set it to a recording
mode? ( 0 38, 54, 100) If you are recording on a memory card, is one
correctly inserted into the camcoder? ( 0 34)
Playback
• Did you turn the camcorder on and correctly set it to playback mode?
( 0 45, 96) If you are playing back recordings from a memory card, is
one correctly inserted into the camcorder? ( 0 34) Does it contain
any recordings?
Other
• Does the camcorder make a rattling sound? The internal lens fixture
can move when the camcorder is turned off or in a playback mode.
This is not a malfunction.