Canon i 475D - Manual (Page 8)

6
„ „ „ „ Installing the Ink Tanks
• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
1 1 1 1 Take out the black ink tank.
2 2 2 2 Hold the ink tank as shown in the
diagram and remove the protective cap.
3 3 3 3 Insert the black ink tank into the right-
hand slot.
4 4 4 4 Press the tab until it clicks into place.
5 5 5 5 Use the same procedure to install the
color ink tank in the left-hand slot.
6 6 6 6 Close the front cover.
Wait until the POWER lamp remains fully lit (about 60
seconds).
• Do not touch the ink port.
• Do not attempt to reattach the
protective cap once it has
been removed.
protective cap
ink port