Canon i 475D - Manual (Page 21)

19
6 6 6 6 Press the OK button.
The screen for selecting a pattern in column B (“b”)
appears.
7 7 7 7 Repeat the above procedure to
determine the pattern numbers (+7 to –
3) of the checked patterns in columns B
through E and the pattern numbers (+5
to –5) of the checked patterns in
columns F through K.
When pattern numbers have been determined up to
column K, maintenance mode number “04” is displayed
again and head alignment is complete.
8 8 8 8 Press the Maintenance button.
You can exit the maintenance mode.
To cancel an operation, press the Maintenance
button and retry the procedure from the beginning.