Rfid txafter – Cognitive Solutions Advantage RFID Thermal Printer User Manual

Page 69

P R O G R A M M I N G

!RFID TXAFTER

Function This

command

controls the state of the hardware’s

RF carrier transmission after any Host Command
to read, write or write and lock an RFID-Tag

Explicit Form

!RFID TXAFTER ON/OFF

Parameters

Causes hardware to keep RF carrier

transmission ON after CPL-RFID Tag-
Interface command completion.

OFF

Causes hardware to turn RF carrier

transmission OFF after CPL-RFID Tag-
Interface command completion

Response

No specific response

Command Type

RFID Setup/Debug Command

Example To

Printer:

!RFID TXAFTER OFF

!RFID ?

From Printer:

Setup/Config Parameters:

Assigned Tag Type: ISO15693

| | |

LED Flash Duration: 250 MSecs

SelecTag before Cmd: ON

TxPowerRF after Cmd: OFF

| | |

NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.