Rfid rdaftwt – Cognitive Solutions Advantage RFID Thermal Printer User Manual

Page 63

Text mode
Original mode

P R O G R A M M I N G

!RFID RDAFTWT

Function This

command

initiates

an integrity test following a

WT command. Data is read and undergoes a byte-
by-byte comparison with the initial data. The

comparison occurs before the WT command is
returned as successful or failed.

Explicit Form

!RFID RDAFTWT ON/OFF

Parameters

Byte-by-byte comparison with initial

data is performed.

OFF

No comparison is performed.

Response

No specific response

Command Type

RFID Setup/Debug Command

Example To

Printer:

!RFID RDAFTWT OFF

NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.