Rfid ssoncmd – Cognitive Solutions Advantage RFID Thermal Printer User Manual

Page 65

P R O G R A M M I N G

!RFID SSONCMD

Function

This command controls the automatic execution of

a Select-Tag command prior to the Host Command
to RT, WT, or WTLOCK an RFID tag.

Explicit Form

!RFID SSONCMD ON/OFF

Parameters

Causes automatic Select-Tag command
executions before any RT, WT or WTLOCK
command.

OFF

No automatic Select-Tag command
occurs

Response

No specific response

Command Type

RFID Setup/Debug Command

Example To

Printer:

!RFID SSONCMD OFF

!RFID ?

From Printer:

Setup/Config Parameters:

Assigned Tag Type: ISO15693

| | |

LED Flash Duration: 250 MSecs

SelecTag before Cmd: ON

TxPowerRF after Cmd: ON

NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.