Cognitive Solutions Advantage RFID Thermal Printer User Manual

Page 25

Text mode
Original mode

P R I N T I N G L A B E L S A N D T A G S

6. In the DOS Editor window, type the commands and data to

be sent to the printer.

NOTE: If you are using a printer with a serial port (COM port), it may be
necessary to save the file and print directly from the Command window.
Refer to If using a printer with a serial port.

7. On the File menu, choose Print.

8. In the Print dialog, verify that the Complete document option

is selected. Then, click OK. The label is sent to the printer.

9. On the File menu, click Exit.

10. At the prompt, type exit. The Command window closes.

If using a printer with a serial port:

1. In the Command window, at the prompt, type exit. The

Command window closes.

2. On the File menu, choose Save.