Rfid ledtime – Cognitive Solutions Advantage RFID Thermal Printer User Manual

Page 61

P R O G R A M M I N G

!RFID LEDTIME

Function

Regulates the interval of LED illumination and

LED OFF time used in generation of an LED Flash
on ‘Success’ or ‘Failure’.

Explicit Form

!RFID LEDTIME nn

Parameters

Determines the LED illumination

interval. Range is 0 to 65535.

Response

No specific response

Command Type

RFID Setup/Debug Command

Example To

Printer:

!RFID LEDTIME 100

!RFID ?

From Printer:

Setup/Config Parameters:

Assigned Tag Type: ISO15693

Mark/OverRide State: OFF

VOID Stamp Message:

LED Flash Control: ON

LED Flash Duration: 250 MSecs

SelecTag before Cmd: ON

NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.