Cisco 78-10450-02 - Manual

C H A P T E R
46-1
Cisco CallManager Administration Guide
78-10450-02
46
Configuring Cisco IP Phones in
Cisco CallManager
Cisco IP Phones are full-featured telephones that can be plugged directly into
your IP network. Cisco CallManager supports the following Cisco IP Phones:
• Cisco IP Phone 7900 Family
• Cisco IP Phone 30 VIP
• Cisco IP Phone 12 SP+
The following devices are also configured through the Cisco CallManager
Administration phone configuration pages:
• H.323 Clients
• CTI Ports
Note Devices such as analog phones or fax machines must be connected
to a gateway (for example, a Cisco VG200 gateway).
If you are administering a large number of phones at your site, you can use the
Bulk Administration Tool (BAT) to perform batch add, modify, and delete
operations for Cisco IP Phones instead of manually adding and configuring each
phone using Cisco CallManager Administration.
BAT is a plug-in application for Cisco CallManager. If BAT is already installed
on your Cisco CallManager system, it can be accessed by opening
Cisco CallManager administration and selecting Application > BAT.