Philips CDR 765 - Manual (Page 22)

PLAYING
a
ca
CA
Programming
You can program up to thirty tracks to play in a desired
sequence using either the CD Player deck or the CD
Recorder/Player. Individual tracks can be included in the
program more than once, but will count as a track each time
they are included.
1
Press CD-R or CD on the remote control to select a deck.
The message SFLECi: CoT orSFLECh Fo'will
briefly appear on the display.
2 Press PROGRAM on the remote control to start
programming.
-» PROG will flash and PEDF EoT or
pros
Ed will briefly appear on the display.
3 Press a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
-♦ On the display, the track number appears briefly,
followed by the total programmed tracks and total
program time.
4 Repeat step 2 for all tracks to be programmed.
5 Press STOP or PROGRAM to end programming.
PROG lights continuously.
Note:
- To review the program, press [r« or^] with the deck in the
stop mode.
- To add more tracks to the program, repeat steps 1 through 6.
- if you try to store more than 30 tracks, FULL appears on
the display
6
Press PLAY to start programmed play.
Clearing a program
1
Press STOP if necessary to stop programmed play.
2 Press STOP again to clear the program.
PROG disappears from the display.
Note: The program is also cleared when you open the disc
tray.
20