Philips CDR 765 - Manual (Page 16)

RECORDING
m
3
U)'
2
To start dubbing, press PLAY on the CD Player deck.
High-speed dubbing will start,
dubb
will stop flashing
and remain lighted. The track number and the recording
time will be displayed.
• To check the (remaining) recording time, press Display (this
can be done during recording).
• Dubbing will stop automatically.
3 To manually stop recording, press STOP
DUBB
will go out and dubbing will stop. The minimal
track length must be four seconds, otherwise a pause
will be added to the track.
After dubbing, the display will show for several seconds. The
Total Time indications may differ slightly, but no audio
information is lost.
Note:
- Pause cannot be operated during dubb .
- Dubbing wili be done one track at a time, meaning that
short pauses wili be added between the tracks. If you
program all tracks in their original sequence and dub at
normal speed ( dubb -1), pauses will not be added.
Start dubbing at normal speed (copy a track or program)
Copying one track at a time
( dubb -1)
is done at normal speed.
1
For recording, press DUBB repeatedly until;
oubbD I appears on the display and
dubb -1
flashes.
After some time,
record
will flash.
ll-P-I'IA-l 'tUSiuC---------------
0
11
n
CUtO iKOTfLf sc:'; S-iL’i-i
I! “
s
'U i OT p ^C; iOi, 1 r: TT:C , ii !( TOT^l P.r ' Tiv:
_/ l_ l_ _ 1
U U U U 1
u
n li
-'..LOG OrT P,"0G
n
11
GCG
2 To select a track for dubbing, briefly press [«◄ or ►»] on the
CD Player one or more times.
• If you want to copy a program, you must enter the program
first before selecting
dubb -1
(see Programming, page
20).
• If you select a track using the digital key pad on the remote
control, dubbing will start automatically.
3 To start dubbing, press PLAY on the CD Player.
-> DUBB-1
will stop flashing and remain lighted and the
selected track or program will be copied at normal
speed. The track number and the recording time used
will be shown on the display. •
• To check the (remaining) recording time, press Display. This
can be done during recording.
Note: Copy prohibited tracks will be copied analogue.
4 To stop dubbing, press STOP.
DUBB-1
will go out and the dubbing will stop. The
minimal track length must be four seconds, otherwise a
pause will be added to the track.
After dubbing,
UPdFl'cE
will appear on the display for
several seconds. The Total Time indications may differ
slightly, but no audio information will be lost.
Note: Pause cannot be operated during dubb -1.
Preparing for digital recording
1
Make sure the disc is absolutely free of scratches and dust
particles.
2 Press SOURCE repeatedly until (depending on the digital
connection used);
-¥ DIG
o' IS ItPL or
DIG
OPS ICFIL appears on the
display.
cos-M.c
OJiM S t J i -'-LE ; c :'.
0 Q :
N 1' ■
. t o t : T . - ' c r - ; i , j | “ o ~
_( MT I L O I " II
u I u l u l l II li
p:j5c DIG : '-iCi Ci'T (C:: H
• If necessary, press DUAL to switch off the
dual
mode;
DUAL
will no longer appear on the display.
3 Press AUTO/MANUAL to switch between automatic and
manual track numbering.
If AUTO is selected (the preferred method),
auto track
will appear on the display.
[FtuTToirtF^ i'.O "-c
1-,
!l - •
lnoTUitl cos.;.c
OUDt SC -''
Q
II
AUTO TRACK TO' 1 T;-,:: . 1 il il luT L G II ■:
11
1!
11
11
• AUTO; The track increments are automatically copied from
the digital source material.
• MANUAL; Track numbers can be incremented manually
by pressing ►«. (minimum track length is
4 seconds).
(This can also be done in AUTO mode).
• Track numbers cannot be changed after recording.
Note: Auto track works only with Consumer Sources with a
digital output signal according to the lEC 358 (consumer
parti audio standard.
14