Philips TV DVD Combo - Manual (Page 8)

How TO U se the T uner M ode C ontrol
T 'he TUNER MODE control allows you to
change the TV’s signal input to either
ANTENNA, CABLE or AUTO mode. It’s
Important for the TV to know what type of
signal to look for. {From a Cable TV signal or
a normal Antenna signal.)
In the AUTO
mode, when the AUTO PROGRAM feature Is
activated, the TV will automatically ciwose
the correct mode.
\
2
3
4
5
6
Press the MENU button on tlie
remote to show tlie on-screen menu.
Press the CURSOR UP or DOWN
buttons to scroll Üt-Tougli. the oit-screeit
menu until the word INSTALL is
highlighted.
Press the CURSOR RIGHT button
to display the INSTALL menu fea­
tures.
Press CURSOR UP or DOWN but­
tons to scroll die Install features until
the words TUNER MODE is high­
lighted.
Press the CURSOR RIGHT button
to select either ANTENNA, CABLE,
or AUTO mode.
When fínished, press the SYSTEIVI
M:ENU (OSD) button to remove the
on-screen menu from die TV’s screen.
HiiLPiUL H int
Wlien CABLE is selected, channels 1-125
are available.
Wlien ANTENNA is selected, channels 2­
69 are available.
Wlien AUTO is selected, the TV will auto-
madcally set iteelf to die amect mode
based on the type of signal it detects when
die AUTO PROGRAM feature is activated.