Philips FW510C - Manual (Page 23)

TllHilí
View Clock
You can view the clock (if it is set) at standby or any
source mode. It will be displayed for about 7 seconds.
• Press CI.OCK»TIMER briefly,
” / "- c'S AM" (tlie current time) will be displayed.
” • w i l l be displayed if the clock is not set.
Clock setting __ _____________
The clock is set in 12-hour mode, e.g, IP:D0 AM or
¡c':Gu PM. Before setting the clock, you must be in the
View Clock mode.
1 Press CLOCK®TIMER to select clock mode.
--" ic':DO AM" or the current time starts flashing.
-», i>i> _ M , >1, R" light up,
2 Set the hour with or
3 Set the minute with N or M.
4 Press CLOCf{®TIPER again to store the setting.
■ • The clock starts running.
• To exit without storing the setting, press STOP D .
Notes:
- During clock setting, if no button is pressed within 90
seconds, the system will exit clock sotting mode
aiitornaiically.
- When power interruption occurs, the clock settir^g is
¿rased.
Timer Setting _____________ _
• The system can switch on to CD or IUNER mode
automatically at a preset lime. It can serve as an
alarm to wake you up. After half an hour from the
preset time, the system will return to the standby
t|iode if no button is pressed.
• Before setting the timer, make sure the clock is set
correctly.
• The timer has to be reset or start again for each
subsecjuent preset time.
• The volume of the timer will be at the last setting
before the system is switched to standby mode.
1 Press and hold CL0CK®TIIV1ER for more than 2
seconds to select timer mode.
"Off lc:Ou AM" or the last set timer starts
flashing. The TIMER flag will be displayed.
The last sehreted source is lighted while other
available sources are flashing.
— "44 _ _ pj '■ (jglll yp
2 Press CD or TUNER to select the desired source.
3 Press ◄◄ or ►► to set the hour for the timer to start,
4 Press N or ►! to set the minute tor the timer to start.
5 Press CLOCK«TIMER again to store the start time
and the selected source.
-*■ The TIMER is now set.
- *■ The TIMER flag remains on the display,
• lo exit without storing the setting, press STOP ■,
• At the preset time, the TIMER will be activated.
The selected source will be played.
..‘ The TIMER flag disappears from the display.
Notes;
- - During timer set ting, if no button is pressed within 90
seconds, the system will e,xit timer setting mode
automatically.
- If the source selected is TUNER, the last tuned
frequency will be switched on
- If the source selected is CD, playback will begin with
the first track of the last selected disc. If the CD trays
are empty, the TUNER will be selected instead.
To cancel the TIMER
1 Press CLOCK®TIMER for more than 2 seconds,
2 Priiss PAUSE II to cancel the timer.
- ♦ "¡'.DNiT.l." will be displayed.
The TIMER flag disappears from the display.
To start the TIMER again (for the same time)
1 Press CLOCK*TIMER for more than 2 seconds,
2 Press CLOCK*TIMER again to store the start time •
and the selected source.
1*1
23