Philips FW510C - Manual (Page 14)

Switching the system ON
Important:
Before you begin operating the system, complete
the preparation procedures.
Demonstration mode
The system has a demonstration mode tlral shows ttie
various features offered by the system. Whenever the
system is switched on from the wall socket, the
demonstration mode will start automatically
Notes:
• During (iomonstratm mode, if you press any source
(or standhy-on) button, the system will switch to the
respective (or standby) mode.
- When the system is switched to standby made, 5
seconds later, the demonstration mode will begin
again.
To cancel {femonstration mode
• Press and hold STOP il (on the system only) for 3
seconds to stop the demonstration.
-’• the demonstration mode will bo switched off
permanently.
I;asy Sot (only in Standby oi Demonstmlion mode)
EASY Stir allows you to store all available radio stations
in a particular band (FM* *AM) automatically (see Easy
Set under TUNER section).
« IY gss STANDBYeON (on the system only), CD,
TUNI-Д TAPE or лих
You can also switcli ot! the system by pressing any one of
the 3 CO OIHECI FLAY buttons.
Switching the system to standby mode
<► Press STANDHYoOW again.
Solocting tlio Source
e Press the respective source selection button; CD,
TUNEH, TAPE orAUX.
- > I he display indicates the selected source.
Note:
• - / or an external source, make sure you have connected
the audio left and tight OUT terminals of Iho external
equipment (1V, VCH, Laser Disc or DVD player) to the
AIJX IN terminals.
14