Philips FW510C - Manual (Page 20)

n i N t t i
„ Manual (irograinmitig
•| 1 Press TUNER.
^ 1 Press TUNER (BAND) to select the desired
waveband: Fy or AM,
3 Press PROGRAM for less than one second.
PROGRAM flag, the frequency and preset station
number start flashing.
■ • The next available preset number will be displayed
for selection.
4 Press TUNING « or ►► to tune to the desired
frequency.
• When all 40 presets are stored, no preset number is
shown.
The message t rtJU." will bo
displayed.
• If you wish to store the radio station to anotlior preset
number, press PRESET T or A to select the desired
preset number.
5 Press PROGRAM again.
PROGRAM flag will stop flashing, and the radio
station will be stored.
« Repeat the above procedure to store other preset radio
stations.
Hotes:
- You can cancel the manual programming by pressing
STOP ■.
- During programming, If no button is pipssed within 20
seconds, the system will exit program mode
automatically
Tuning to Preset Radio Stations
® Press PRESET T or A to select the desired preset
number.
The preset number, frequency and waveband
appear on the display.
20^