Philips FW510C - Manual (Page 18)

ijta
i:ii
Notes:
If the total playing time is more than "3 3 '■ S S'" or if
one of the programmed hacks has a number greater
than 30, then - "appears in the display instead
of the total playing time.
During programming, If no button is pressed within 20
seconds, the system will exit program mode
automatically
Playing the prqgrai^
1 Press PLAY ► to start program playback.
"pi ,qtj Pf?0Gf?Ri(" will be displayed.
-» The track number and elapsed playing time of the
current track will atrpear on tlio display.
• If you press REPEAT during program playback, tlie
current track will bo (rlayeil repeatedly.
* The nCPEAT and PROGRAM flags will be displayed.
2 Press STOP ■ to stop program playback.
Note:
- If you press any of the 3 CD DIRECT PLAY buttons, the
system will play the selected disc or track and the
stored program will be ignored temporarily. The
PfIOGRAM flag will also temporarily disappear from
the display and then reappear, when the playback for
the selected disc ends.
ttoviuwiiifi tiui {ootiiaiii
Reviewing of the program is only possible in tlie stop
mode,
• Press PREVM or NEXT M repeatedly to review the
programmed tracks,
• Press STOP ■ to exit review mode.
Erasing the program (in the stop mode)
• Press CLEAR on the system.
-•> TR[]BRR1 riERRRB" will be displayed.
Note:
- The program will be erased when the system is
disconnected from the power supply. If the CD
carousel is opened, the tracks belonging to the outer
two trays will be erased and the display will show
TLERRES:
$h uff I e (only on remote control) ________ ___
It will play all the available discs and their tracks in
random order. Shuffle may also be used when tracks are
programmed.
To shuffle ail the discs ami tracks
1 Press SHUFFLE.
‘ "SHuEiEE" will be displayed.
The SHUFTLE flag, the disc and the track selected
at random appear on the display.
® The discs and the tracks will now be played in random
order until you press STOP E9
• If you press REPEAT during shuffling, the current track
will be played repeatedly.
- The REPEAT and SHUFFLE flags will be displayed.
2 Press SHUFFLE again to resume normal playback.
Ttie SHUFFLE flag disappears from the display.
Note:
- All the available discs will be played once, then stop.
Ropeat (only on remote control)
It will play the current track repeatedly.
1 Press REPEAT during playback.
“REPERT TRREK" will be displayed.
The REF^EAT flag and the track selected appear on
the display.
• The track will now be played repeatedly until you
press STOP«,
1 Press REPEAT again to resume normal playback.
The REPEAT flag disappears from the display.