Operation, Selecting another track during play (1-0), Searching for a passage during play – Philips CD 931 User Manual
Page 6: Starting with a particular track (1-0)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
@) OPERATION
m
3
(£_
3)'
DISPLAY
PLAYBACK (PLAY/REPLAY)
REPEAT - Lights up when you repeat a CD or a programme.
REPEAT 1 - Lights up when you repeat a track.
(((O - Lights up when the player receives a command from the
remote control (only if no ESI BUS connection has been
made).
FTS
- Flashes after the FTS key has been pressed.
- Lights up when an FTS programme is played.
SHUFFLE - Lights up when the tracks are played in random
order.
PROGRAM
- Flashes when a programme is being compiled.
- Lights up when a programme is being played.
TRACK - Indicates:
- what track is being played;
the number of tracks on the CD or in a programme.
TRACK TIME - Indicates the elapsed playing time of the track
being played.
REM(aining) TRACK TIME - Indicates the remaining playing
time of the track being played.
TOTAL REM(aining) TIME - Indicates the remaining playing
time of the CD or a programme.
TOTAL TIME - Indicates the total playing time of the CD or a
programme.
PAUSE - Lights up when play is interrupted.
AUTOSPACE - Lights up when an extra pause is inserted
between the various tracks.
11IIIII FADER II III II - Indicates the fade-in and fade-out time.
EDIT - Lights up when the player is put into the EDIT mode.
1-20 track number indicator - Shows the number of tracks
on the CD.
+20 - Lights up when there are more than 20 tracks on the CD.
READING - Lights up when the CD's contents list is being
scanned.
LOADED - Lights up when you press STOP/CP during the
scanning of the CD's contents list.
NO DISC - Lights up when you try to start play while there is
no CD in the compartment.
ERROR - Lights up if you try to start play when the CD is inserted
with the printed side facing down or if the CD is damaged.
WRONG TRACK - Lights up if you select a non-existent track
number.
GO TO PLAT - Lights up if you try to activate a function for
which you must first start play.
GO TO STOP - Lights up if you try to activate a function for
which you must first stop play.
NOTE!
Use only audio CDs; no CD-ROM, CD-
or CDV.
• Press POWER STANDBY/OFF to switch the player on.
• Open the CD compartment by pressing OPEN/C^LOSE.
- OPEN lights up.
• Insert an audio CD, printed side up, and close the
compartment.
- CLOSE lights up, followed by READING; the number of
tracks and the playing time of the CD are shown on the display.
• Press PLAY/REPU\Y to start play.
You can also press PLAY/REPLAY immediately after inserting
the CD; the compartment then closes automatically.
- The number indicator shows how many tracks are on the
CD; when a track has been played its number disappears.
- The track being played is always shown under TRACK and
its elapsed playing time is shown under TRACK TIME.
- Play will stop after the last track.
• Press POWER STANDBY/OFF to switch the player off.
You can interrupt playback by pressing PAUSE; PAUSE then
lights up. Press PLAY/REPLAY to restart; if you first press
PAUSE again and then PLAY/REPLAY, the current track starts
again from the beginning.
If you press PLAY/REPLAY during play, the current track starts
again from the beginning.
You can stop playback by pressing STOP/CP or OPEN/CLOSE.
SELECTING ANOTHER TRACK DURING PLAY (1-0)
• Key in the desired number (numbers consisting of two
figures must be keyed in within 2 seconds).
- The music stops and a moment later the selected track
begins to play.
You can also select the number by using TRACK ►! or
!◄ TRACK.
SEARCHING FOR A PASSAGE DURING PLAY
(◄◄ SEARCH ►►)
Hold
Hold
down to search backwards to the beginning,
down to search forwards to the end.
The searching speed is determined by how long a key is
pressed:
- the first 2 seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.
If you reach the end of the last track and release ►►, play will
resume a few seconds before the end of the CD.
STARTING WITH A PARTICULAR TRACK (1-0)
• Key in the required number (numbers consisting of two
figures must be keyed in within 2 seconds).
- Play starts from the selected track.
You can also select the number by using TRACK ►! or
!◄ TRACK and then pressing PLAY/REPLAY.