Philips 17AA3547 - Manual (Page 5)

Operation
Auto Programming
The Auto Programming function can be used to find and store all
available channels quickly. Channels are stored on program numbers in
the same sequence as they are found.
After Auto Programming is started, the TV starts searching for a channel.
If a channel is found, it will be automatically stored on program number 1.
Searching will start again automatically. If another channel is found, it will
be stored on program 2, etc.
Your TV can receive different TV systems. With Auto Programming the
TV searches automatically through all TV systems and stores all TV
channels available.
The TV systems are automatically selected as in the following sequence and
channels in those TV systems are searched for automatically:
1 - TV system FRANCE (SECAM L L')
2 - TV system EUROPE {PAL/SECAM BG)
3 - TV system UK
(PAL I)
At the end of the Auto Programming cycle the TV switches to program 1.
o Press simultaneously the two buttons longer than 4
seconds to start the Auto Programming.
The Auto programming is stopped by pressing simuitaneousiy
the two buttons.
PHILIPS
□
0 0 0
0 0 0
0 0 0
0
a □ □
Q a
□ □
□ a □
□ □ □
oooo
Operation
On Screen Display
The On Screen Display information allows you to see the program
number on which a TV channel is stored, the timer status, and a
moving bar if the volume is adjusted.
o Press C±1 to display information on the screen,
o Press C±) again to switch off information.
Selecting TV channels
Press P — or + or press one or two digit buttons on the remote control.
To select a program number from 0 to 9 press one digit button.
To select a program number from 10 to 59 you must press two digit
buttons in less than 4 seconds.
or
o Press — or + on the TV.
Volume control —
o Press ^ — or + on the remote control.
Interrupting the sound
o Press i]^ to switch off the sound,
o Press i)^ again or ^ + to switch on the sound.
o o o;
+ I
PHILIPS
□ L- ^ +1
(D (D
(3)
© © ©
© ® ©
©
□ □ □