beautypg.com

Selecting another track during play (0-9), Selecting another cd during play (disc select), Searching for a passage during play – Philips CDC 935 User Manual

Page 8: Fast search for a passage, Operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

@ OPERATION

m

3

(Q_

55'

PLAYBACK (PLAY/REPLAY)

• Press PLAY/REPLAY (18).

- - -

- -

- - flashes and play starts from the CD with

the lowest number.

- The CD number indicator (1-5) always shows what CD is

being played {► X) and the track number indicator (1-15)
shows how many tracks are on the CD; when a track has
been played, its number disappears.

- The track being played is always shown under TRACK, and

its elapsed playing time is shown under TRACK TIME.

- Play will stop after the last CD.

• Press POWER STANDBY/OFF (1) to switch the changer off.

NOTE!

- You can also press PLAY/REPLAY (18) immediately after in­

serting the CDs; the compartment then closes automatically.

- You can interrupt playback by pressing PAUSE (19)-,

PAUSE then lights up. Press PLAY/REPLAY to restart; if

you first press PAUSE again and then PLAY/REPLAY, the
current track will start again from the beginning.

- If you press PLAY/REPLAY during play, the current track

will start again from the beginning.

- You can stop playback by pressing STOP/CP (17).
-
If you press OPEN/CLOSE (11) during play, the CD

compartment will open while play continues. The three
CDs outside the changer may now be changed without
playback being interrupted.

SELECTING ANOTHER TRACK DURING PLAY (0-9)

• Key in the desired track number (on the current CD);

numbers consisting of two figures must be keyed in within

2 seconds.

- The music stops and a moment later the selected track

begins to play.

You can also select the number by using TRACK ►! or

!◄ TRACK (16).

SELECTING ANOTHER CD DURING PLAY (DISC SELECT)

• Select the number of the required CD using DISC SELECT

(

10

).

- The music stops and a moment later the selected CD begins

to play.

You can also select the number by using the DISC button on
the remote control.
WRONG DISC lights up if you select a non-existent number.

SEARCHING FOR A PASSAGE DURING PLAY

I

SEARCH ►►)

• Hold
• Hold

(20) down to search backwards to the beginning.
(20) down to search forwards to the end.

The searching speed is determined by how long a key is

pressed:

- the first 2 seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.

If you reach the end of the last track and release ►►, play will

resume a few seconds before the end of the CD.

Fast search for a passage:
• Press FAST.

- FAST lights up.

• Press ◄◄ or I

STARTING WITH A PARTICULAR CD (DISC SELECT)

• Select the number of the required CD using DISC SELECT

(

10

).

- If the CD compartment was open, it will now close.
- Play starts from the selected CD.

You can also select the number by using the DISC button on
the remote control.

WRONG DISC lights up if you select a non-existent number.

STARTING WITH A PARTICULAR TRACK (0-9)

• First select the number of the required CD using DISC

SELECT (10) or DISC (on the remote control).

• Then key in the required track number (numbers consisting

of two figures must be keyed in within 2 seconds).

- If the CD compartment was open, it will now close.
- Play starts from the selected track.

You can also select the (track) number by using TRACK ►! or
!◄ TRACK (16) and then pressing PLAY/REPLAY (18).

SCANNING THE CD'S (SCAN)

• Press SCAN (15) before or during play.

- If the CD compartment was open, it will now close.
- SCFiN lights up and the first 10 seconds of each track are

played in turn.

- 10 seconds are counted down each time under REM(aining)

TRACK TIME.

- GLflN lights up before each new track.

• When the player reaches a track which you wish to hear in

full, press SCAN again or PLAY/REPLAY (18).

Other scan times can be entered in the PRESETS mode. For

this refer to 'PERSONAL PRESETS' on page 11.

PLAYING THE CD IN RANDOM ORDER (SHUFFLE)

All CDs:

• Press SHUFFLE (14) before or during play.

- If the CD compartment was open, it will now close.
- SHUFFLE lights up and all the tracks are now played in a

random order.

• Press SHUFFLE again if you wish to return to normal play.

If you press !◄ TRACK (16), the current track will be started

again.

If you press TRACK ►! (16), you will select any one of the

following tracks.

One CD:

• Select the number of the required CD using DISC SELECT

(10) or DISC (on the remote control).

• Press SHUFFLE (14).

- DISC and SHUFFLE light up; the tracks of the selected CD

will now be played in a random order.

• Press SHUFFLE again if you wish to return to normal play.

If you press !◄ TRACK (16), the current track will be started

again.

If you press TRACK ►! (16), you will select any one of the next

tracks.

If you press REPEAT (23), the tracks will be repeated in a

different order each time, although the first track will always be
the same.

At this speed no sound is audible.

This manual is related to the following products: