Philips CDC 935 - Manual (Page 7)

OPERATION @)
REMOTE CONTROL
- The buttons on the remote control have the same functions
as the corresponding ones on the changer;
- The life of the batteries in the remote control is around one
year. For replacement use only R03, UM4 or AAA batteries.
GO TO F'LRY - Lights up when you try to activate a function
for which you must first start play.
GO TO STOP - Lights up when you try to activate a function
for which you must first stop play.
.52
"5)
c
lU
IMPORTANT!
When the changer is incorporated in a HiFi system with ESI
BUS connection, the IR SENSOR OFF ON switch (4) on the
back of the changer should always be in the OFF position.
The changer can then be operated with the remote control
of the system.
When the changer is not incorporated in a HiFi system with
ESI BUS connection, the switch should be in the ON position.
The changer can then be operated with the remote control
supplied.
When switching the IR SENSOR on and off, the CD changer
should always be switched off.
INSERTING THE CDs
DISPLAY
SHUFFLE - Lights up when the tracks are played in random order.
(((O - Lights up when the changer receives a command from
the remote control (IR SENSOR ON).
FTS
- Flashes after the FTS key has been pressed.
- Lights up when an FTS program is played.
REPEAT DISC - Lights up when you repeat a CD.
REPEAT - Lights up when you repeat all CDs or a program
from them.
1>5 CD number indicator
- Flashes when you switch the changer on.
- Indicates the number of CDs in the CD compartment.
- Indicates what CD is being played.
PROGRAM
- Flashes when a program is being compiled.
- Lights up when a program is being played.
TRACK - Indicates:
- what track is being played;
- the number of tracks on a CD or in a program.
TRACK TIME - Indicates the elapsed playing time of the track
being played.
REM(aining) TRACK TIME - Indicates the remaining playing
time of the track being played.
TOTAL REM(aining) TIME - Indicates the remaining playing
time of a CD.
TOTAL TIME - Indicates the total playing time of a CD.
AUTOSPACE - Lights up when an extra pause is inserted
between the different tracks.
PAUSE - Lights up when play is interrupted.
EDIT - Lights up when the changer is put into the EDIT mode.
TIMER EDIT - Lights up when the changer is put into the
TIMER EDIT mode.
1-15 track number indicator - Shows the number of tracks
on a CD.
+15 - Lights up when there are more than 15 tracks on a CD.
NO DISC - Lights up when there are no CDs in the
CD compartment.
ERROR - Lights up when you make a mistake while operating
the changer.
----- --------------------- Flashes when a CD's contents list is being
scanned.
• Press POWER STANDBY/OFF (1) to switch the changer on.
- The changer will now start CD detection to check how many
CDs there are in the CD compartment. The turntable v41l
rotate slowly until all positions in the CD compartment have
been checked.
- After CD detection the display will show the number of CDs
in the CD compartment (X DISC).
• Open the CD compartment by pressing OPEN/CLOSE (1V-
- OPEN lights up.
• Insert the CDs, printed side up.
• Use the LOAD button (27) to rotate the turntable in the CD
compartment.
Close the compartment by pressing OPEN/CLOSE (1).
CLOSE lights up.
The changer will start CD detection again, after which the
display will show the number of CDs in the CD compartment
(X DISC).
NOTE!
- Use the PREFERRED POSITION in the CD compartment
if you wish to play only one CD and then start play by
pressing the QUICK PLAY button (26). Play will then start
immediately with the inserted CD.
- CD detection may never be interrupted. If, during
detection, you press any button, then the changer will
stop detection and the display will give an incorrect
indication of the number of CDs in the CD compartment.
- Always remove all CDs from the CD compartment if you
want to transport the changer.