Philips CDI210/73 - Manual (Page 7)

INSTALLATION
4. ANTENNA CONNECTIONS
Available on some player versions only.
• Connect the player to the TV antenna input, using the
matching cable.
• If you already have a VCR (or antenna or cable) connected to
the TV antenna input and your CD-i player has an antenna
input, connect the CD-i player bettveen the VCR (or antenna
or cable) antenna output and the TV antenna input, you may
also use an optional external switchbox, if desired.
- Your CD-i player sends pictures and sound to your TV on the
channel number indicated on the rear or on the channel
selector position (15) at the rear. This signal is sent through
the coaxial cable.
• To operate tlie player with your TV, set your TV to the same
channel.
- If your CD-i player has a channel selector (15), located at the
rear, you can avoid local interference by tuning to a different
channel.
(ANTENNA or CABLE INPUT
or VCR OUTPUT)
-------------------awnm
n
--------VHP----------1
75n
RF COAXIAL CABLE
-ffTtea-
NOTE
The sound sent through the RF output to your TV is mono
only.
Please refer to the instructions that came with the TV-set for
the selection of the channel.
5. OTHER VIDEO CONNECTION POSSIBILITIES
If all of the above mentioned inputs of your TV-set are used by
other equipment and you are not able to make one of these
Inputs free the following can be done:
It is possible that your VCR has a video input (CVBS) free (with
corresponding audio).
Please connect both audio and video to your VCR. Please refer to
the VCR manual how to use this input.
6. AUDIO CONNECTIONS
- If you use the TV antenna input (17) or the A/W
Euroconnector (14), the TV will play sound along with the
picture.
• If you use the video (CVBS) (13) input, you will also need to
connect the player’s audio output (11,12) to the TV’s audio
input.
For Hifi sound, you can connect the player’s audio output
(11,12) to the input of your HiFi system, provided that the
player, TV and HiFi system are placed close to each other.
I n ñ
€> 0 0 o
1
AUDIO
IN
AUDIO
CABLE
CAUnON
DO NOT CONNECT THE PIAYER^S AUDIO OUTPUT (11, 12)
TO THE HIFI PHONO (RECORD PLAYER)