Before requesting serv ce – Philips CDI210/73 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEFORE REQUESTING SERV CE
If it appears that the CD-I player is faulty, first consult this check
list.
It may be that something simple has been overlooked.
Under no circumstances attempt to repair the system yourself;
this will invalidate the warranty.
No power......................... • Check that the ON/OFF
button (7) is set to on.
• Check that both plugs on the power
cord are properly connected.
• Check that there is power at the AC
outlet by plugging in another appliance.
No picture........................ • Check that the TV is switched on.
• Select the same channel or input on
the TV as that of the player.
• Check the video connection.
Distorted picture.............. • Check the disc for fingerprints and
clean with a soft cloth, wiping from
centre to edge.
No open icon
on TV screen....................• Switch the player off, then switch
on again while holding the STOP
button (6) pressed.
No start-up.
Screen does not change
.........................................• Check the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by
trying another disc.
No sound..........................• Check audio connections.
• If using a HiFi amplifier, try another
sound source.
Distorted sound
from HiFi amplifier......... • Check that audio connections are
not made to amplifier Phono input.
No return to start-up
screen when disc is
removed........................... • Reset by switching the player off,
then on again.
• Check if the CD-i program requires
another disc to be loaded.
The player can’t be
remote controlled.............• Aim the remote control direcdy at the
sensor on the player.
• Avoid all obstacles which may inter
fere with the signal path.
• Inspect or replace the batteries.
14