Philips CDI210/73 - Manual (Page 6)

INSTALLATION
I. CHOOSING THE RIGHT CONNECTIONS
Most of today's TV receivers have various picture input
connections. In order of picture quality, these are:
- A/V Euroconnector (or SCART);
- Video (CVBS);
- Antenna in.
Depending on the version of your player it is advised to connect
it to the TV input with the highest picture quality.
NOTE
- Please refer to the instructions that come with the TV set for
selection of the correct input.
I
14
13 Video output (CVBS).
14 A/V Eurocoimector*.
17 In from antenna*.
•Available on some player versions only.
13 17
2. CONNECTION TO A TV WITH AN A/V E^JROCONNECTOR SOCKET
Available on some player versions only.
• Connect the corresponding connectors with the matching cable.
NOTE
- Using the blue Euroconnector of your TV will give the best
video quality and depending on the TV set also automatic
input switching.
- Please refer to the instructions that come with the TV-set for
selection of the correct input.
- Some TV-sets have a pre-set to give the ultimate picture
quality when set to CD-i/Photo CD. This setting will only be
effective when the blue Euroconnector is used. Please refer to
the instructions that come with the TV-set on presets.
3. CONNECTION TO A TV WITH A VIDEO (CVBS) SOCKET
' Just connect the corresponding connectors with a matching video
or CVBS cable.
' This cable does not connect the audio, which has to be
connected separately.
NOTE
■ Please refer to the instructions that come with the TV set for
selection of the correct input.