Philips AZ 2804 - Manual (Page 8)

LOUDSPEAKERS BASIC FUNCTIONS
m
3
*S.
w*
Removable speakers
Connecting the speakers
Connect the right speaker to the R jack and the left speaker to
the L jack.
Note: Speakers other than supplied can be used.
They have to be 4 Ohms.
Taking off the speakers
Keep the lever (on the back of the speakers) pressed and slide
the speaker upwards.
Attaching the speakers
Slide the speakers from above in the sleeves on the sides
of the set cabinet. The speakers will click into position.
FRONT FRONT
RIGHT LEFT
¡Switching on and off/standby
Push the POWER button.
-► The display lights up (only if the set is connected to the AC
power supply).
The set is switched off when the POWER button is released.
When the set is switched off the last source selected v/ill be
memorized, as well as the sound settings, the tuner presets and
the volume level.
In order to switch off the power supply completely, remove the
mains plug.
Note: If the set runs on batteries, always be sure to set the POWER
button in the OFF position after use. This will avoid
unnecessary power consumption.
Adjusting volume and sound
Adjust the volume using the controls VOLUME T A.
-► Display indication: Volume level from 0 to 32.
Adjust the sound to your taste by pressing the button DSC several
times.
-► A light indicates either DBB JAZZ POP.