Recording from the cd player - cd synchro start, Recording from the radio or with the microphone, Cassehe recorder – Philips AZ 2804 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CASSEHE RECORDER

Protecting tapes from accidental erasure

• Keep the cassette side to be safeguarded in front of you and

break out the left tab. Recording on this side is now no longer

possible.

• To record again on this side of the cassette, cover the aperture

with a piece of adhesive tape.

Recording from the CD player - CD synchro start

1 Select the CD mode by pressing the CD«TAPE«TLINER button

several times until

appears on the display.

2 Insert a CD and if desired, program track numbers.

3 Press ST0P»0PEN ■ A to open the cassette compartment.

4 Insert a blank cassette with the full reel on the left.

5 Press RECORD • to start recording.

-► Playing of the CD or program starts automatically. It is not

necessary to start the CD player separately.

For brief interruptions, press PAUSE

II.

To resume recording,

press the PAUSE

key once more.

7 To stop recording, press ST0P*0PENB A.

Notes: The recording can be started from different positons:

- if the CD player is in the pause position, recording will

start from this very position (use SEARCH

or ^);

- if the CD player is in the stop position, recording will

start from the beginning of the CD or program.

U cj.c ~i

Recording from the radio or with the microphone

(Selecting and preparing the source)

TUNER:

Select the tuner mode by pressing the

CD»TAPE»TUNER button several times until iìTn?i appears on

the display.

MICROPHONE:

Select the tape mode by pressing the

CD»TAPE»TUNER button several times until C331 appears on

the display.

Connect a microphone with a 3.5 mm plug to the MIC jack

and set the VOLUME control to zero (monitoring during

microphone recording is not possible).

This manual is related to the following products: