Philips AZ 2804 - Manual (Page 16)

GENERAL INFORMATION
m
3
fa
General maintenance
Do not expose the set, batteries, CDs or tapes to humidity, rain,
sand or excessive heat (caused by heating equipment or direct
sunlight).
The mechanical parts of the set contain self-lubricating bearings
and must not be oiled or lubricated!
You can clean the set with a soft, slightly dampened chamois
leather. Do not use any cleaning agents as they may have a
corrosive effect.
|Tape deck maintenance
To ensure a good recording and playback quality of the tape deck,
clean the parts ( a ) (|) (c) after approx. 50 hours of operation. Use a
cotton bud slightly moistened with alcohol or a special head cleaning
fluid
Press PLAY ► and clean the rubber pressure rollers (c).
Press PAUSE II and clean the capstans (D and the heads ®.
Note: Cleaning of the heads ® can also be done by playing a
cleaning tape through once.
CD player and CD handling
The lens may cloud over when the set is suddenly moved from cold
to warm surroundings. Playing a CD is not possible then. Leave the
CD player in a warm environment until the moisture evaporates.
To take the CD out of its box easily, press the center spindle while
lifting the CD.
Always pick up the CD by the edge and put it back in its box
after use.
To clean the CD, wipe it off in a straight line from the center
towards the edge using a soft, lint-free cloth. A cleaning agent may
damage the disc!
Never write on a CD or attach stickers to it.
16