Ejecting the disc, If your philips cd rewriter is powered-up, If your philips cd rewriter is not powered up – Philips PCRW404K/17 User Manual
Page 25: Manual eject (emergency use)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ejecting the Disc
If your Philips CD Rewriter is powered-up:
Press the eject button to eject the disc.
Note:
You cannot open the tray iftheATAPI command prohibits the eject operation while
your Philips CD Rewriter is reading data.
Caution: Be sure to remove the disc only after the tray is completely open. (Attempting to remove
the disc before it is completely ejected may cause the drive to malfunction.)
Press the eject button
If your Philips CD Rewriter is not powered up:
Pressing the eject button will not eject the disc.
Manual Eject (emergency use)
We will explain below how to eject the disc when the tray cannot be opened in the normal
manner, for example if the power is shut-off inadvertently or the loading mechanism fails.
This technique should be used only as a last resort. Frequent use may lead to malfunction.
You will need a rod-like object of 1 mm or less in diameter to do this. A straightened paper
clip works well.
1.
Insert the pin-like tool into the manual eject port and push
gently.
The spring-loaded mechanism ejects the disc.
2.
After manually ejecting a disc, you must turn off the power
supply to your Philips CD Rewriter, then turn it back on
before continuing.