Re-attach the cover to the computer, Start up your operating system, Install your philips cd recording software – Philips PCRW404K/17 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10.
Re-attach the cover to the computer.
11.
Connect the power cable to an AC outlet, and switch on
your computer.
Make sure that the LED located on the panel of your Philips CD Rewriter drive is lit.
12.
Start up your operating system.
For the procedure, refer to the manual for your operating system.
13.
Install your Philips CD recording software
For the installation procedure, refer to the easy installation instructions on the CD-
ROM sleeve or simply insert the software CD in your computers CD-ROM drive.
The software installation process will then begin automatically; just follow the on
screen prompts. In addition, a complete user manual for the software is located on
the CD-ROM in the root directory under “Manual”. Simply click on the language
you wish to use.