Connect the power supply cable, Tighten the four fastening screws securely – Philips PCRW404K/17 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8. Connect the power supply cable.
Connect the +12V and +5V 4-pin power cable to the power supply interface located on
the rear panel of your Philips CD Rewriter drive.
The shape of the connector makes it impossible to reverse the connections.
If you have difficulty when inserting the connector, try gently wiggling the connector left
and right while inserting it.
9. Tighten the four fastening screws securely.
This manual is related to the following products: