Philips AZ8061 - Manual (Page 7)

CD PLAYER
Playing a CD
1 Set the POWER selector to CD.
2 Open the lid by pressing the OPEN-CLOSE button.
3 Insert an audio CD (printed side up) and close the lid.
-►The CD player starts and scans the contents list of the CD.
After that, the total number of tracks appear on the display
and the CD player stops.
4 Press the PLAY-PAUSE ► button to start CD play.
-►Display indication: the current track number.
5 Press the STOP ■ button to stop CD play.
-►Display indication: the total number of tracks.
• You can interrupt CD play by pressing PLAY-PAUSE ►.
Continue CD play by pressing the button again.
-►Display indication: the current track number flashes.
Note: CD play will also stop
- if you open the lid;
- if you move the POWER selector or
- if the end of the CD is reached.
"5 j
B
LU
Example
Display indication in
pause position:
the current track number
flashes.
Display indication:
when the CD lid is open.
SEARCH backwards and forwards ► m
1
Selecting another track
Briefly press the SEARCH or ►« button once/several times to
skip to the beginning of the current/previous or subsequent
track(s).
-►Display indication: the selected track number.
-►During play: CD play continues automatically with the
selected track.
-►In stop position: press PLAY-PAUSE ► to start CD play.
Searching for a passage during CD play
Hold down the SEARCH r« or button to find a particular
passage in forwards or backwards direction.
-►CD play continues at a low volume.
2 Release the button when you have reached the desired passage.
Note: In the SHUFFLE and in REPEAT-1 mode and when playing a
program, searching is only possible within the particular track.