Philips SPA9300 - Manual

1
BASS CONTROL
REMOTE CONTROL SPEAKER OUT
1
R L
3
4
2
AC
PC
POWER
Welcome
Quick start guide
SPA9300
Specifications are subject to change without notice.
Trademarks are property of Koninklijke Philips Electronics N.V. or their respective owners.
2005 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com
312 247 501 062
Connect
1. Connect the satellites to the SPEAKER OUT port of the subwoofer.
2. Connect the black plug of the wired remote control to the REMOTE CONTROL port of the
subwoofer.
3. Connect the green plug of the wired remote control to the corresponding port of your audio
source (for example, your computer).
4. Connect the power cable of the subwoofer to a power supply.
Need help?
Online help: www.philips.com/support
Helpline
United Kingdom 0906 1010 016 (£ 0.15)
Multimedia Speakers
Connect
Enjoy
1
2
BASS
CONTROL
POWER POWER
4
1
3
5 MP3
Enjoy
1. Push the POWER button on the wired remote control to turn on the multimedia speakers.
> The blue light on the wired remote control comes on.
2. Make sure that your audio source is correctly configured.
3. Adjust the bass level with the BASS CONTROL control on the rear of the subwoofer.
4. Adjust the volume level with the VOLUME control on the wired remote control.
> You can now enjoy the sound of your multimedia speakers.
5. You can connect an auxiliary audio source to the wired remote control.
> The sound of the auxiliary audio source is sent to the multimedia speakers.
2
SPA9300_QSG_Single_EN.qxd 08-12-2005 15:27 Pagina 1