beautypg.com

Norge, España, Copyright in the u.k – Philips AZ8061 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Norge

Typeskiltfinnes pà apparatens underside.

Observen

Nettbryteren er sekundert innkoplet. Den

innebygde netdelen er derfor ikke frakoplet nettet s§

lenge apparatet er tilsluttet nettkontakten.

España

Declaración de conformidad con normas

El que suscribe, en nombre y representación de:

Consumer

Electronics

Factory

Philips Hong Kong Ltd.

declara, bajo su propia responsabilidad, que el

equipo:

Radiocasete/CD

fabricado pon Philips H.K. Ltd.

Consumer Electronics Factory

en:

Far East

marca:

Philips

modelos:

AZ8060-AZ8061-AZ8062

objeto de esta declaración, cumple con la normativa

siguiente: Reglamento sobre Perturbaciones

Radioeléctricas, Real Decreto 138/1989, Anexo V.

Hecboen:

Hong Kong, 01-11-94

Firma:

Nombre:

Cargo:

T.M.SÍU

Quality Manager

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To

change a fuse in this type of plug proceed as follows:

1 Remove fuse cover and fuse.

2 Fix new fuse which should be

a BS1362 5 Amp, A.S.T.A. or BSI approved type.

3 Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it

should be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of

5 Amp. If a plug without a fuse is used, the fuse at the

distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a

possible shock hazard should it be inserted into a 13 Amp

socket elsewhere.

How to connect a plug

The wires in the mams lead are coloured with the following
code; blue = neutral (N), brown = live (L). As these colours

may not correspond with the colour markings identifying the
terminals in your plug, proceed as follows:

• Connect the blue wire to the terminal marked N or col­

oured black.

• Connect the brown wire to the terminal marked L or col­

oured red.

• Do not connect either wire to the earth temrinal in the

plug, marked

E

(or +) or coloured green (or green and

yellow).

Before replacing the plug cover, make certain that the cord

grip is clamped over the sheath of the lead - not simply ove ■

the two wires.

Copyright in the U.K.

Recording and playback of material may require consent

See Copyright Act 1956 and The Perf omner's Protection Acts

1958 to 1972.

This manual is related to the following products: