Philips FWC380 - Manual (Page 51)

All the sound control features (e.g. DSC,
VEC, DB6, etc.) are available for
selection.
me tape is securea at ootn enas wiui
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
u y u l l i u i J L I U I l U / V I I A .
To prevent accidental recording, break
out the tab on the left shoulder of the
tape side that you want to protect.
O
TIMER SLEEP TIMER
Notes:
- During tinner setting if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
- If the source selected is TUNER, the
last tuned frequency will be switched
on.
- If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the disc
trays are empty, the TUNER will be
selected instead.
- The timer will not activate if a recording
is in progress.
To switch off theTIMER
1 Press and hold CLOCK'TIMER
for more than two seconds.
2 Press ■ on the system to cancel the
timer.
-♦ The timer is now switched off.
“♦The display will show "000" and
the TIMER disappears.
To start theTIMER again ffor the
same preset time and source)
1 Press and hold CLOCK*TIMER
for more than two seconds.
2 Press CLOCK'TIMER again to
store the start time.
^The timer is now on.
-♦The TIMER appears on the display.
Sleep Timer
(only on remote
control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
1 Press SLEEP on the remote control
repeatedly to select a period of time.
-♦The selections are as follows (time
in minutes): lb —■ 30 bb — uG
displayed.
minutes.
Dr "000" will be
is the time in
When you reach the desired length
of time, stop pressing the SLEEP
button.
^The SLEEP display lights up.
^The Sleep Timer is now set. Before
the system switches to standby
mode, a countdown of 10
seconds will be displayed.
While SLEEP mode Is activated
• Press SLEEP once to view the
remaining length of time.
• Press SLEEP twice to change the
pre-selected period of time.
■^The display will show the
remaining time followed by the
sequence of sleep timer options.
To switch off the Sleep Timer
• Press SLEEP repeatedly until "uGr"
is displayed, or press the
STANDBY-ON button